Multi-Tech ISIHI-2S Specifikace Strana 55

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 188
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 54
MultiModem ISI Hybrid Series, ISIHI-2S/2U 55
Chapter 3—Software/Driver Installation
NetWare Connect (Novell) Driver Installation
Multi-Tech Systems provides AIO drivers for the ISIHI-2S/2U, so it can function with
Novell compatible asynchronous applications (e.g., NetWare Connect). The AIO driver is
simply an NLM (NetWare Loadable Module) that runs on the file server. Drivers must be
loaded on the file server where the board is installed. Drivers can be loaded from the file
servers console prompt or incorporated for autoloading in the AUTOEXEC.NCF file.
To install the Multi-Tech AIO driver, copy the file AIOISIX.NLM to the system directory
of the file server from a workstation on the network. To copy, use this command:
COPY A:\AIOISIX.NLM F\:SYSTEM
To load the driver, go to the system or PC console (where the ISIHI-2S/2U is installed)
and enter the following at the prompt:
LOAD AIOISIX [port=W] [int=X] [name=Y] [note=Z]
W is the hexadecimal I/O port address for the ISIHI-2S/2U. The ISIHI-2S/2U
occupies the next 15 I/O addresses on the bus. That is, if you specify the address
210 hex, then the ISIHI-2S/2U occupies addresses from 210 hex to A hex (total of
16 addresses).
X is the interrupt (IRQ) vector number for the ISIHI-2S/2U. The ISIHI-2S/2U can
be set for IRQ vectors 10, 11, 12 & 15.
Y sets the ISIHI-2S/2U board name.
Z overrides the default node ID number for the ISIHI-2S/2U.
Note: All these parameters are optional. If none are supplied, the AIO driver assumes the
default I/O address and IRQ values and tries to load the driver.
To install the ISIHI scripts, copy aiomdms.mdc to f:\system\aio\directory. Click Yes to
overwrite the existing aiomdms.mdc file.
IRQ Jumpers
Setting IRQs consists of installing the IRQ jumper on the two pins that indicate the
interrupt vector. For example, IRQ10 is chosen in the configuration below.
234 5710111215
: : : : : [:] : : :
Zobrazit stránku 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 187 188

Komentáře k této Příručce

Žádné komentáře