Multi-Tech ISIHI-2S Specifikace stáhnout pdf (Strana 132)

132 MultiModemISI Hybrid Series, ISIHI-2S/2U

Appendix

The following displays:

A:\>608TERM -A2C0

Loading Firmware to ISI608 located at address 2C0h

Loading default file: ISI608.BIN

ISI608 loading firmware . . .

ISI608 verifying firmware . . . Verify OK.

ISI608 firmware loaded successfully.

ISI firmware loaded successfully . . .

Enter 1 to 8 for eight ports ISI.

Enter port number ?

The first step in this utility is to identify the port to be tested. In order for the test to

function, the selected port must be connected to a modem that is switched on. Valid

entries for the MultiModemISI are 1 through 8. Once a port is selected, the following

displays:

Enter 8 == 1200 baud

Enter 11== 2400 baud

Enter 15== 9600 baud

Enter 16== 19200 baud

Enter 17== 38400 baud

Enter 18== 57600 baud

Enter 19== 115200 baud

Enter the baud rate you wish to run?

This step allows selection of a baud rate for testing. Once a baud rate is selected, the

following displays:

ISI Terminal Utility is ready. Press F10 to Exit./

This message indicates that keyboard entry can now be performed. Any characters typed

on the keyboard are sent through the ISI board to the modem and then returned to display

on the PC. When operation has been verified, exit the utility by pressing F10.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 187 188

Žádné komentáře

Multi-Tech ISIHI-2S Specifikace Strana 132