Multi-Tech ISIHI-2S Specifikace stáhnout pdf (Strana 102)

102 MultiModemISI Hybrid Series, ISIHI-2S/2U

Chapter 5—TERMINAL ADAPTER AT Commands, S-Registers, Result Codes

&Zn=x Store Telephone Number

Values: n = 09; x = dial string

Default: n/a

Allows you to store a telephone number in a memory register for faster dialing. To store a

number, type &Z, the register number (09) where you want to store the number, the =

character, and the dialing string you want stored. Then press ENTER. The dialing string can

have up to 80 characters. To read a stored number, type AT&Zn? (e.g., AT&Z4?) where

n is the number of the register you want to read. To display a list of all numbers stored in

memory, type ATL and press RETURN:

0 14082345678

1 16125551212

2 14089876543

4 6313551

6 4258513

8 16126313550

9 12138880123

DSn Dialing a Stored Telephone Number

Values: n = 09

Default: n/a

To dial a stored telephone number, type ATDSn in terminal mode, where n is the location

of the number you want to dial. For example, typing ATDS6 <cr> dials a telephone

stored in memory register 6 location.

$Dn Persistent DTR Dialing

Values: n = 0, or 1

Default: $D0 (Disabled)

Enables or disables persistent DTR dialing (PDD). PDD causes the terminal adapter to

automatically and continually redial stored telephone number 0 when the port has no

active calls and DTR is high.

%En Escape Sequence Options

Values: n = 05

Default: %E1 and %E4

By default, the modem responds only to the +++ escape method. However, you can use

the %E command to set the modem to respond only to the <break> method, to respond to

either +++ or the <break> method, or to ignore both methods and not escape.

%E0 Modem wont escape

%E1 +++ escape method

%E2 <BREAK> escape method

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 187 188

Žádné komentáře

Multi-Tech ISIHI-2S Specifikace Strana 102